Reset the IP Camera Password using the mobile app DMSS (Email Recovery must have been set up on the device during initialization) > Link to Guide: Reset the IP Camera Password using the reset button (available on most models) Most Dahua IP cameras have a physical reset button on the device that can be used to reset the device to factory defaults. IPC-HFW5442E-ZE FW: V2.800.0000000.0.R Build Date: 2019-05-21. So I wanted to do a factory rest on my camera with the build 2020-06-20 Because since after I upgraded my NVR from a July 2019 build to the latest current build, my camera plugged into Port 1 with the 2020 build fw, disconnects every 3-5min. The camera is unusable due to this. Dahua 8ch 5MP Combo kit with 6 Bullet and 2 Dom Camera with all required accessories https://amzn.to/321yjRt Dahua 16ch 5MP Combo kit with 16 Camera with all required accessories How To Factory Reset Dahua DVR Hik-Connect Hikvision 41.4K subscribers Subscribe Subscribed 185 Share 58K views 2 years ago How To Online Dahua DVR : • How To Online Dahua DVR | Dahua DVR 2) Remove any SD card from the camera. 3) Wait 10 mins. 4) Connect the ethernet cable to the camera and your router, you should hear a click when the cable is connected. 5) Wait 2 mins. 6) Connect the power cable to the camera. 7) Wait 5 mins for the camera to power up. 8) Locate the camera's reset button or recess. How to do. Step 1: Plug in the power to the Camera, then wait for the device to finish booting (about 1 minute) Step 2: Press and hold the reset button as shown in the picture for 15 seconds. Step 3: The camera will restart and return to its default state. NEWS. 2023-11-08. Delegation of Fiji Deputy Prime Minister Visits Dahua Global Headquarters. Dahua Technology is a world-leading video-centric AIoT solution and service provider. Contents show 1 Dvr Default Password List Overview 1.1 Dahua default IP address and password 1.2 For NVR and DVR default account include: 2 Hidden user-default/default 3 GEOVISION default password Description. Instructions. Scan. It is the function that the speed dome can horizontally scan back and forth to display image with a certain speed in a certain range. The speed dome can scan back and forth with a certain speed in a set range after left and right limit and scan speed are set. The function can be realized via OSD as well. 4. Go to the Settings > Security section, and then select Use TLS 1.1 and Use TLS 1.2. 5. Click OK. 5 Setting Set the server IP as the platform CMS IP. If the network has to go across LAN and WAN, you need to enter WAN IP in the Mapping IP box. 6 About Software version information. 7 Minimize Minimize the interface. 8 Close — 9 Service Status hT64ST.